About 50 results
Open links in new tab
  1. Uniform flow occurs when | Civil4M

    Jan 21, 2018 · Uniform flow occurs when (a) the flow is steady (b) the flow is streamline (c) size and shape of the cross section in a particular length remain constant (d) size and cross section change …

  2. Stone - Stone masonry made from uniform sized and coursed ... - Civil4M

    Jan 16, 2018 · Stone masonry made from uniform sized and coursed stones joined with mortar and fine finished is called - (a) ashlar masonry (b) simple stone masonry (c) rubble masonry (d) none of the …

  3. Uniform pressure & Temperature predominant metamorphism is

    Feb 27, 2022 · Uniform pressure & Temperature predominant metamorphism is A Dynamothermal metamorphism B Thermal metamorphism C Plutonic metamorphism D None of the above The …

  4. Deflection - A uniform rise in temperature on a portal frame ... - Civil4M

    Jan 17, 2018 · A uniform rise in temperature on a portal frame will cause - (a) No sway (b) May cause sway depending on the temperature (c) May cause sway depending on the relative properties of the …

  5. Work Procedure Specifications for Internal and External ... - Civil4M

    Sep 16, 2017 · Wetting shall be uniform. To avoid cracks at the junction of concrete with masonry work, the plaster shall be reinforced at such junctions by fixing standard wire mesh (6 x 6 x 6/6) as directed …

  6. Uniform flow occurs when | Civil4M

    Jan 21, 2018 · Uniform flow occurs when (a) the direction and magnitude of the velocity at all points are identical (b) the velocity of successive fluid pai-ticles, at any point, is the same at suc¬cessive …

  7. AGGREGATE IMPACT TEST IS: 2386 (Part IV) - Civil4M

    Mar 29, 2018 · AGGREGATE IMPACT VALUE TEST IS: 2386 (Part IV) OBJECTIVE: To determine the impact value of the road aggregates. To assess their suitability in road construction on the basis of …

  8. Types of test done on reinforcement steel bars | Civil4M

    Dec 31, 2017 · During visual inspection of bar, if the cross sectional area is not seen uniform throught length. A sample should be cut of not less than 0.5 meter and its weight and length should be recorded.

  9. Technical Specifications for Granular Sub Base (GSB) - Civil4M

    Jan 27, 2018 · GRANULAR SUB-BASE SCOPE This work shall consist of laying and compacting well-graded material on prepared subgrade in accordance with the requirements of Specifications. The …

  10. Important Questions of BMC | Civil4M

    Jan 6, 2018 · (a) all bricks need not be uniform in size (b) bats must be used in alternate courses only (c) the vertical joints in alternate courses should fall in plumb (d) cement mortar used must have …